1.4~4.0mm*1350mm (excellent)
Push-pull Acid Pickling Production line 200,000t/y
The acid pickling tanks are divided into 3 sections. Tank wall is carbon steel structure lined with acid-resistance neoprene and 2-layer granite stone. This structure can avoid neoprene lined to break when the granite stone is replaced. Between each tank section, there is acid liquid squeezing roller and acid liquid isolation room. At bottom, land with granite stone lining is at the same horizontal level with down roller of squeezing rubber roller. On the coil running platform, there is a PPH granite stone cover. Squeezing roller is driven by frequency conversion, and during threading process the coil end position status can be detected through motor currency variation, which could avoid that the thinner coils being overlapped inside the acid tank avoided.
Fe203+6HC1====2FeCl3+3H20
Fe304+8HC1====2 FeC13+FeC12+4H20
Fe0+2HC1====FeC12+H20
Fe+2HCl====FeC12+H2↑
In each acid tank, there is an acid liquid circling heating system. The system adopts vertical graphite heat exchanger. The acid liquid moves fast in turbulence form under the functions of tank wall structure, thus speed for acid pickling is increased. New acid would be added at constant volume from 3# acid liquid circling tank, meanwhile filled into 2#, 1# tanks through liquid level controlling system of acid liquid circling tank. Finally be piped into waste acid liquid collection tanks from the 1# tank. Due to the relative isolation among each acid liquid tank and their independent circling, the acid concentration difference of each tank could be effectively controlled.
Crane hoisting coils to skids →coil loading car→ decoiler (pressure roller, anti-curve roller) → decoiling scraper → Deflector roll → vertical guide roller → pinch roller straightener → crop shearer →corner shearer(with scrap bucket) → vertical guide roller → pre-washing trough → four-grade hydrochloric acid pickling trough → four-grade washing trough (Including pre-washing section) → edge blowing device → hot air dryer → II# pinch roller → looper (Both ends are equipped with looper swing stand) → vertical guide roller → pinch centering machine → circle shearer (With waste edge recoiler) → 3-roller tension roller → crosscut shearer → vertical guide roller → steering pinch roller → recoiler → coil unloading trolley → coil receiving stand→ Crane hoisting coils to storage house
Basic Parameter | Steel type | Q195/235, ST12/13, SPHC, SPHD and 20# |
| Yield strength | 210~360N/mm2 |
| Tensile strength | 270~610N/mm2 |
| Coil thickness | 1.5~4.0mm |
| Coil width | 900~1350mm |
Business Coverage:
Acid pickling line, acid regenerating unit, cold rolling line, hot-dip galvanizing line, hot dip aluminizing line, color coating line, recoiling line, degreasing line, annealing line, temper rolling line, tension leveler line, slitting line, cross cutting line, electro tinning line, structural parts galvanizing line, tunnel furnace, and automatic control system e
Product Tags:
|
|
200000t/Y Continuous Pickling Line In Steel Industry 1.4mm 4.0mm 1350mm Images
|
